Firmware Version 1.0.1.1.00 incorporates the following improvements.
1. Enables peripheral illumination correction for the following lenses:
EF lenses:
EF 16-35mm f/4L IS USM
EF-S 10-18mm f/4-5.6 IS STM
EF 400mm f/4 DO IS II USM
EF 11-24mm f/4L USM
EF 24-105mm f/3.5-5.6 IS STM
EF 100-400mm f/4.5-5.6L IS II USM
EF-S 24mm f/2.8 STM
CINE-SERVO lens:
CN7x17 KAS S/E1
Firmware Version 1.0.1.1.00 is for cameras with Firmware Version from 1.0.0.1.00. If your camera's firmware is already version 1.0.1.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
Preparations for the Firmware Update:
After the Firmware update has been performed, the camera's menu and custom picture settings will be reset. It is recommended that users save their menu and custom picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed.
The downloaded folder contains the firmware (file name: VKI3.FIM / file size: 42,532,896 bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese).
About Digital Camera Firmware:
Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.
This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.
评论没有发现