WPNT834 Initial Release Firmware Version 1.0.24

WPNT834 Initial Release Firmware Version 1.0.24

Known Issues

1. While most Web browsers may be used to access the WPNT834 administration page, NETGEAR strongly recommends that you use the latest version of Internet Explorer to access the WPNT834.
2. PPPoE connection may not disconnect, even after the idle timeout period.

To Download the Original Firmware

1. Download the link below to a convenient place such as your desktop.
2. Log in the router at http://192.168.1.1.
3. Click Maintenance > Router Upgrade.
4. Click Browse and locate the file you just downloaded.
5. Click Upload. While the firmware is loading, do not interrupt the upgrade process.

The router reboots when the upgrade is complete.

To check that the upgrade was successful, log in to the router again at http://192.168.1.1 and check the firmware version.

Published: Dec. 1, 2005

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.