Version: 1.00
. Distribution
Package Contents
This readme
file provides information on VIA-P VT6205(A) USB 2.0
device windows 2K/SP1/SP2 driver package. VIA Technologies assumes no
responsibility for any errors in this document and no part of this document may
be reproduced, transmitted, or translated into any language, or in any form
without the prior written permission of VIA Technologies Incorporated. The
supported platforms are described in System Requirement section.
Hardware
This package should be installed on the VIA-P VT6205(A) USB 2.0 Devices.
Software
This software package only supports Microsoft Windows© Platforms. The setup program will detect the current platform and install proper driver on your system. The supported platforms are list below:
[The supported platform here]
Windows 2K/SP1/SP2
The setup program will display the released data
and version for this package at dialog title.
There is specific version syntax for package
identification:
The X is
the major version of this package; and YZ represents the minor version.
In this section, we show the detail file list of ZIP-compressed package in which include setup and driver files.
Setup
files
0X0409.INI,
INSTMSIA.EXE, INSTMSIW.EXE,
ISSCRIPT.MSI,
Platform.msi,
PCIENUM.SYS,
README.htm,
SETUP.EXE,
Setup.ini,
SETUP.MLF,
SETUP.SCF, viasetup.dll,
asia.slf, english.slf, europe1.slf, europe2.slf,
europe3.slf, europe4.slf,
165x300.bmp 500x60.bmp
Component
[win98drv]
win98drv\component,
win98drv\win98drv.dll, win98drv\umss.inf, win98drv\umss.sys,
win98drv\umsspdr.pdr
There are two operation modes, Windows UI and command line, to execute installation and remove. The most popular is the Windows UI mode that provides convenient user interface and systematic operation. The command line mode, also called as silent mode, need user append more parameters behind SETUP.EXE as answer to make the setup program silence without pop any dialogs.
There are possible two types setup
package you may have. One is compressed as a zip file includes visible setup
and driver files. Another one is made as a self-extracted-execution file. In
the following, we will show you the steps to complete driver installation and
remove with both package types.
If the downloaded file is ZIP-compressed format, please extract it to proper location in your hard disk first. Then launch the SETUP.EXE by double-clicking. Otherwise, you could double-click the self-extracted-execution file and wait for few seconds for the self-extraction. The extracted file will be deleted automatically after setup has been terminated.
First time execution
If it is the first time to execute the setup package, you will only have the choice of installation.
Maintenance
After the first time execution, you could have choice to make “Update” and “Remove”. You will see two options, “Update” and “Remove” in the first shown dialog. If you are going to update the driver, please active the “Update” radio button and press next button to enter next steps. Else, if you are going to remove the installed driver in your system, please active the “Remove” radio button and press next button to enter next steps.
The silent mode are usually applied to system maintainer for servicing hundreds systems that won’t have interactive user interface. They would execute the setup through command line in console or batch file execution without closing any popped dialog popped or pressing next buttons. In addition, the command line parameters of these two types of downloaded file format get few differences.
ZIP-Compressed Package
In this type package, you could see a setup.exe in those extracted files. User could append parameters behind setup.exe as command line in console.
The
present command line parameters are: -s and /z"reboot;remove;kompnt:xx,yy,zz"
|
Parameter |
Description |
|
-s |
It is a required command line parameter to enable
silent mode operation. If this parameter is missed, the setup |
|
-z”Param1;…;ParamN” |
It passes predefined parameters to SETUP.EXE.
Each parameter, Param1;…;ParamN,
should be separated with semicolons. The predefined sub-parameters are: reboot It causes Setup.exe automatically to reboot after the silent mode operation completed. remove It is
a switch to cause Setup.exe to
remove components. If this parameter is absent, then SETUP.EXE will install
components. |
Examples:
|
Command line |
Execution
|
|
setup.exe -s |
Silent install all included components but not
reboot the computer. |
|
setup.exe -s /z"reboot" |
Silent install all component and reboot the
computer. |
|
setup.exe -s /z"reboot;remove" |
Silent uninstall all include component and reboot
the computer. |
|
setup.exe -s /z"remove" |
Silent uninstall all components but not reboot
the computer. |
The default-supported language in this package is in English.
If the executed Windows OS is in an un-supported language to this
package, the user interface will be represented in English.
This setup package support 10 languages as
East
Chinese(Simplified), Chinese (Traditional), Indonesian,
Japanese, Korean, Russian,
Thai, Turkish.
West
Basque, Bulgarian, Catalan,
Croatian, Czech, Danish,
Dutch, English, Finish,
French(
Greek, Hungarian, Italian,
Norwegian, Polish,
Portuguese(Brazi),
Portuguese(Portugal), Romanian, Serbian,
Slovak, Slovenian, Spanish,
Swedish.
All the
language sequence is arranged as alphabetical.
[Your limitation and known issues listed here]
All copyrights are reserved by VIA Technologies,
Inc. http://www.via.com.tw/